감추기
MCU상반기결산
홈 > 센서/모듈/키트

아두이노 자동 식물 물주기 키트 Arduino Automatic Smart Plant Watering Kit [AAK90039K]
자동 물주기 키트를 사용하여 쉽고 제한 없이 모든 스마트 플랜트 모니터링 시스템을 이용 할 수 있습니다. 이 키트에는 물이 통과할 수 있도록 4개의 수로, 워터펌프 토양 수분 감지기, 수도 스위치 등이 포함되어 있습니다.
판매가격 : 55,000
적립금 :550
상품상태 :신상품
제품코드 :1376538
제조사 :ELECROW
출시일 :2018-02-12
구매수량 :
아답터 :
총 금액 :
MCU이용 꿀팁

4,180원
1,090원
22,660원
2,400원
10,560원
5,900원
27,500원
11,220원
2,750원
14,500원
상세정보 배송/취소/교환안내 이용후기 상품Q&A

Package list

  • Crowtail- soil moisture sensors x 4
  • Crowtail- smart pump shield x 1
  • 5.5M water pipe x 1
  • DC12V Four-Way Valve x 1
  • Water pump x1
  • 50cm 3 pin crowatail cable x4

 

Features

The Smart Watering Kit allows to provide all your own smart plant monitoring system with ease of use and unlimited options! The kit include pump, soil moisture sensors, water switch to redirect the water to up to 4 plants and pipes for the water to go through.
When you power the board after uploading the Arduino program we attached in the wiki, the board using the 4 soil moisture sensors to dentermine the soil level in the plant.The board will send command to the switch to open specific channel for specific plant that needs water currently (up to 4 plants at once).
Afterwards, the board will send command to turn on the pump and suck water into the switch, the switch will separate the stream and will give just enough water for your plants. Then it will close the pump and the switch and continue to check when does your plant needs water. It's possible to make it even smarter with light sensor so for example the plant will not be watered at night or with rain sensor so if it's raining, don't water the plant as well. The smart watering kit is based on Crowduino Smart pump shield which is included as well with the kit.
The Smart Pump Shield is a brand new one-of-a-kind shield that allows to build projects with ease and elimate the need of jumpers, breadboards, mess and complexity. The smart pump shield, orignally developed for smart watering kit allows to connect multiple sensors including humidity sensor, light sensor, rain sensor and soil moiusture sensors. it provides 5 relays that can be controlled seperately by pins or by integrating the interfaces. 4 relays can control 4 channels water switch directly and the 5th relay can control a pump, all by crowduino interfaces for ease of use and less complexity. The board also provides 12v input that split between the board and the arduino, providing the arduino 5v input, that eliminates the need of another seperated power adapters.
The shield can be used for versious projects including but not limited to smart watering system, smart home, vending and drinking machine, cocktail mixer and so on.

  • Eliminates the need of messy jumpers and breadboards, connect all sensors and modules with ease!
  • Control the relays both with Crowduino interfaces and with normal ones, the board is not limited to crowduino only.
  • Power the board with single 12V power supply, no need seperate power supply for the arduino.
  • 6 interfaces for sensors, one interface for water switch and one interface for motor or pump.
  • on-board power switch to control the power.

 

Specifications

  • Weight: 900g
  • Size of the box: 25cm x 19cm x 5.7cm
  • Length of water pipe: 5m.
  • Length of 3 pin crowtail cable: 50cm.

 

Wiki & External links

 

※ 공급 제조사는 재고 사정에 따라 동일 사양의 대체상품으로 공급될 수 있습니다.
※ 상기 제품에 첨부된 데이타시트는 참고사항입니다.데이타시트에 표기된 내용에 대하여 본사는 어떠한 기술적인 문의 및 발생하는 문제에 대한 법적인 책임을 지지는 않습니다. 
※ 사용자께서는 사용 전 반드시 제품에 대한 테스트 및 확인 절차 후 사용하시기 바랍니다

상세정보 배송/취소/교환안내 이용후기 상품Q&A