ATMEGA8515-16AI/AU | | 
| Features | |
| - High-performance, Low-power AVR 8-bit Microcontroller
- RISC Architecture
– 130 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 16 MIPS Throughput at 16 MHz – On-chip 2-cycle Multiplier - Nonvolatile Program and Data Memories
– 8K Bytes of In-System Self-programmable Flash Endurance: 10,000 Write/Erase Cycles – Optional Boot Code Section with Independent Lock bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – 512 Bytes EEPROM Endurance: 100,000 Write/Erase Cycles – 512 Bytes Internal SRAM – Up to 64K Bytes Optional External Memory Space – Programming Lock for Software Security - Peripheral Features
– One 8-bit Timer/Counter with Separate Prescaler and Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode – Three PWM Channels – Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer with Separate On-chip Oscillator – On-chip Analog Comparator - Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection – Internal Calibrated RC Oscillator – External and Internal Interrupt Sources – Three Sleep Modes: Idle, Power-down and Standby - I/O and Packages
– 35 Programmable I/O Lines – 40-pin PDIP, 44-lead TQFP, 44-lead PLCC, and 44-pad MLF - Operating Voltages
– 2.7 - 5.5V for ATmega8515L – 4.5 - 5.5V for ATmega8515 - Speed Grades
– 0 - 8 MHz for ATmega8515L – 0 - 16 MHz for ATmega8515
| 
| Ordering Information | |
| - Pacakage : 44-pin, TQFP
- Operation Range : Industrial(-40¡ÆC to 85¡ÆC)
|
|