감추기
MCU상반기결산
홈 > 라즈베리파이 > 디스플레이

10.1' Display & Audio 1280x800 IPS - HDMI/VGA/NTSC/PAL [ada-1694]
10.1인치 IPS(고해상도, 광시야각) + HDMI 스테레오 스피커 지원 / 9-12VDC / 16:10 / 1200 x 800 / 350cd / 800:1 / HDCP 미지원
판매가격 : 204,600
적립금 :2,046
상품상태 :신상품
제품코드 :1171202
제조사 :adafruit
브랜드 :아다프루트 [브랜드바로가기]
출시일 :2018-02-07
구매수량 :
총 금액 :
MCU이용 꿀팁

66,000원
165,000원
163,680원
42,900원
26,400원
46,200원
35,200원
29,900원
52,800원
20,900원
상세정보 배송/취소/교환안내 이용후기 상품Q&A




  10.1" Display & Audio 1280x800 IPS - HDMI/VGA/NTSC/PAL [ada-1694]






Description

Make a lovely audio/video setup with a 10.1" IPS screen with HDMI stereo speaker support. For video, we have a beautiful bright 10.1" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 10" diagonal and is a 'raw' display as is used in a tablet, ultra thin with some mounting tabs around the edge. We include a driver board with HDMI, VGA and Composite inputs as well as stereo 4 ohm at 3W output driving capability. The setup is very easy to use - simply connect a 9 to 12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports and two 4 to 8 ohm speakers to the SPK output pins. Voila, a display!

There's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tried to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.

We include a plug-in cable that connects to the 4 speaker output pins, the pins are labeled LOUT+/- and ROUT+/- you'll have to solder your own speakers to the 4 wires

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.

For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to 1280x800 in case it doesn't detect the resolution properly. You can see our suggested config.txt in the Technical details tab. The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save.

For use with a BeagleBone black, we found it works when plugged in, no configuration required.

A power adapter is NOT included. You will need to either purchase a 9 or 12VDC adapter or you can use one you've already got around the house. We show the display on a bent wire stand which is not included, but you can pick one up here






 

10.1" Display & Audio1280x800 IPS - VGA/NTSC/PAL/NTSC (17:02)



TECHNICAL DETAILS

  • Driver Datasheet
  • Keyboard Datasheet
  • Power with 9-12VDC
  • 16:10 display ratio
  • Resolution: 1200 x 800
  • Visible area: 217mm x 135mm 16:10
  • Brightness: 350cd/m2
  • Contrast: 800:1
  • We ship with a an HSD101PWW1 display, or equivalent
  • Display dimensions: 230mm x 150 x 5.2 mm
  • Not HDCP compatible - it cannot be used with 'secured' HDMI sources

Power draw from combined display+HDMI driver when backlight is on

  • 5V: 980mA (not guaranteed to function at 5V)
  • 6V: 780mA (not guaranteed to function at 6V)
  • 7V: 660mA
  • 8V: 575mA
  • 9V: 515mA
  • 10V: 450mA
  • 11V: 415mA
  • 12V: 380mA

For more information on this HDMI display, including a suggested config.txt, check out our HDMI Display UBERGUIDE!




※ 공급 제조사는 재고 사정에 따라 동일 사양의 대체상품으로 공급될 수 있습니다.
※ 상기 제품에 첨부된 데이타시트는 참고사항입니다.데이타시트에 표기된 내용에 대하여 본사는 어떠한 기술적인 문의 및 발생하는 문제에 대한 법적인 책임을 지지는 않습니다. 
※ 사용자께서는 사용 전 반드시 제품에 대한 테스트 및 확인 절차 후 사용하시기 바랍니다

상세정보 배송/취소/교환안내 이용후기 상품Q&A