감추기
MCU상반기결산
홈 > 라즈베리파이 > 확장보드

Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit - MPR121 [ada-2340]
라즈베리파이 호환 Add-on / 전도성 터치센서를 활용한 프로젝트 / 사람이나 동물이 터치하는 것을 감지하게 됩니다. / 라즈베리파이, 스피커, 악어클립 별매
판매가격 : 19,800
적립금 :198
상품상태 :신상품
제품코드 :1170697
제조사 :adafruit
브랜드 :아다프루트 [브랜드바로가기]
출시일 :2018-02-07
주의사항 :해외상품 - 상품 준비기간 약 일주일 소요됩니다.
구매수량 :
총 금액 :
MCU이용 꿀팁

33,000원
24,600원
59,400원
61,500원
21,900원
64,900원
10,030원
51,500원
52,800원
9,900원
상세정보 배송/취소/교환안내 이용후기 상품Q&A






Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit                 - MPR121 [ada-2340]

Description

This touch-able add on HAT for Raspberry Pi will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes. Capacitive touch sensing used for stuff like touch-reactive tablets and phones, as well as control panels for appliances, which is where you may have used it before. This HAT allows you to create electronics that can react to human touch, with up to 12 individual sensors.

The HAT has 12 'figure 8' holes in it that can be gripped onto with alligator clip cables. Attach one side of the clip to the HAT and the other side to something electrically conductive (like metal) or full of water (like vegetables or fruit!) Then start up our handy Python library code to detect when the object is touched. That's pretty much it, very easy! For advanced users, you can also solder to a pad to make a slimmer & more permanent connection.

Works great with Raspberry Pi Model A+, B+, or Pi 2. This HAT can be used with Model A or Model B but requires purchase/soldering of a extra-tall 2x13 header instead of the 2x20 included.

We're working on a detailed tutorial, meanwhile you can check out the tutorial for the non-HAT/breakout-version of this chip with the Raspberry Pi here which uses the exact same library and code. We have examples for reading touches, turning touches into keyboard KeyUp/KeyDown presses (so you can make a veggie-keyboard) as well as an audio player that will play a sound per sensor (fruit drums!)

Each order comes with a Capacitive Touch HAT and a 2x20 socket header. You'll need to do some light through-hole soldering to attach the headers onto the HAT circuit board, but its easy to do with basic soldering tools like a soldering iron and rosin core electronics solder. You'll also likely want to pick up a 12 pack of alligator clips!

Please note! This kit does not come with Raspberry Pi, alligator clips, speaker, or delicious fruit! However, we do have all of those in the store. Well, all except fruit - despite being called Adafruit, we do not actually sell fruit



 

Details

  • 57mm x 65mm x 3mm / 2.2" x 2.6" x 0.1"
  • Weight: 10g

※ 공급 제조사는 재고 사정에 따라 동일 사양의 대체상품으로 공급될 수 있습니다.
※ 상기 제품에 첨부된 데이타시트는 참고사항입니다.데이타시트에 표기된 내용에 대하여 본사는 어떠한 기술적인 문의 및 발생하는 문제에 대한 법적인 책임을 지지는 않습니다. 
※ 사용자께서는 사용 전 반드시 제품에 대한 테스트 및 확인 절차 후 사용하시기 바랍니다

상세정보 배송/취소/교환안내 이용후기 상품Q&A