감추기
MCU상반기결산
홈 > 라즈베리파이 > 확장보드

Adafruit Half-size Perma-Proto Raspberry Pi Breadboard PCB Kit [ada-1148]
PermaProto half sized proto board + Pi Cobbler (2x13 pin header) / 85mm x 55mm / FR4
판매가격 : 7,920
적립금 :79
상품상태 :신상품
제품코드 :1265057
제조사 :adafruit
브랜드 :아다프루트 [브랜드바로가기]
출시일 :2018-02-07
주의사항 :해외상품 - 상품 준비기간 4-6일 소요됩니다.
구매수량 :
총 금액 :
MCU이용 꿀팁

21,780원
7,900원
7,040원
10,560원
9,900원
64,900원
8,710원
11,000원
59,400원
2,750원
상세정보 배송/취소/교환안내 이용후기 상품Q&A






Adafruit Half-size Perma-Proto Raspberry Pi Breadboard PCB Kit [ada-1148]

Description

We put a PermaProto half sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the PermaProto for Pi! It has the Cobbler baked right in. Simply solder the 2x13 pin header in and you get all the labeled breakouts with tons of prototyping space, power rails, mounting holes and that gorgeous silk.

Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: its always crummy quality, with pads that flake off and no labeling. Then we thought about how peopleactually prototype - usually starting with a solderless breadboard and then transferring the parts to a more permanent PCB. That's when we realized what people would really like is a proto board that makes it easy!

This proto-board is the PCB you always wish you had, but never realized it! We took the basic layout of a half-sized breadboard (the PCB has 30 rows) and turned that into a beautiful PCB. The top side has a white silkscreen, and the same markings you're familiar with, to make transferring components easy. The bottom has the 5-hole pad design that matches a classic breadboard, with 4 power bus lines on the sides, and no mask so you can easily cut traces when necessary. We used 1.2mm diameter drill holes so even parts with big leads will fit. All holes are thru-plated for strength - these wont peel off with rework. The finish is a gold plate - you won't get oxidation like with bare copper perf! There are also tons of mounting holes so you can attach the PCB to your project box.

Comes with one PCB and one box header, you'll need to do a little light soldering to attach the box header to the PCB but its fast and easy to do. To connect it to a Pi, you'll also need a 26-pin GPIO cableif you don't already have one

 

TECHNICAL DETAILS

  • 13 rows of 4-pin holes breaking out the GPIO cable, 1 row of double 4-pin and 14 rows of double 5-hole rows
  • 4 power rails with positive/negative markings
  • 3.3" x 2.0" (85mm x 55mm), 0.063" thick FR4
  • 1.2mm / 0.047" drill holes

 

※ 공급 제조사는 재고 사정에 따라 동일 사양의 대체상품으로 공급될 수 있습니다.
※ 상기 제품에 첨부된 데이타시트는 참고사항입니다.데이타시트에 표기된 내용에 대하여 본사는 어떠한 기술적인 문의 및 발생하는 문제에 대한 법적인 책임을 지지는 않습니다. 
※ 사용자께서는 사용 전 반드시 제품에 대한 테스트 및 확인 절차 후 사용하시기 바랍니다

상세정보 배송/취소/교환안내 이용후기 상품Q&A