감추기
크리스마스MCU
홈 > 아두이노 > 아두이노 악세사리 기타

Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix [ada-1430]
53.36mm x 68.85mm x 3.22mm / 27.10g / 5x8 matrix (40 RGB LED) / 40개의 LED는 모두 개별적 (색상 등) 지정이 가능합니다.
판매가격 : 36,960
적립금 :370
상품상태 :신상품
제품코드 :1171189
제조사 :adafruit
브랜드 :아다프루트 [브랜드바로가기]
출시일 :2018-02-07
구매수량 :
총 금액 :
MCU이용 꿀팁

13,000원
3,000원
1,430원
1,650원
14,300원
37,700원
1,600원
1,680원
50,160원
13,200원
상세정보 배송/취소/교환안내 이용후기 상품Q&A

 Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix [ada-1430]

DESCRIPTION

Put on your sunglasses before putting this shield onto your 'duino - 40 eye-blistering RGB LEDs adorn the NeoPixel shield for a blast of configurable color. Arranged in a 5x8 matrix, each pixel is individually addressable. Only one pin (Digital #6) is required to control all the LEDs. You can cut a trace and use nearly any other pin if you need some customization. 

To make it easy to start, the LEDs are powered from the 5v onboard Arduino supply. As long as you aren't lighting up all the pixels full power white that should be fine. You can also solder in the included terminal block (pro-tip: put it on the bottom of the board so it doesn't stick up) to attach an external 4-6VDC power supply. There's a polarity protection FET on there in case you wire the power backwards (we would never do that, it was, umm, a friend of ours, yeah that's it!) 

If, say, you need MORE blinky, you can chain these together. For the second shield, connect the DIN connection to the first shield's DOUT. Also connect a ground pin together and power with 5V. There you go! You can chain as many as you'd like although after 5 or more shields you may run low on RAM if you're using an UNO. 

We include both stacking headers and plain headers. Use whichever you prefer - there isn't a lot of space left over for the 'duino pin breakouts so if you want to wire up some other outputs or sensors the stacking headers are good. For a slim sturdy look, solder on the plain headers.

Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix

 

TECHNICAL DETAILS

  • Dimensions:53.36mm / 2.1" x 68.85mm / 2.7" x 3.22mm / 0.12"
  • Weight: 27.10g
  • We currently ship this product with the WS2812B 4-pin chip LED installed. Previous versions may have come with the WS2812S 6-pin LED. Both B and S LEDs can be chained together and are compatible with the NeoPixel Libary. The 'B chip type adds additional polarity protection and is the same brightness as the 'S type.

 





※ 공급 제조사는 재고 사정에 따라 동일 사양의 대체상품으로 공급될 수 있습니다.
※ 상기 제품에 첨부된 데이타시트는 참고사항입니다.데이타시트에 표기된 내용에 대하여 본사는 어떠한 기술적인 문의 및 발생하는 문제에 대한 법적인 책임을 지지는 않습니다. 
※ 사용자께서는 사용 전 반드시 제품에 대한 테스트 및 확인 절차 후 사용하시기 바랍니다

상세정보 배송/취소/교환안내 이용후기 상품Q&A