감추기
MCU상반기결산
홈 > 라즈베리파이 > 케이스

Adafruit Pi Box Plus - Enclosure for RasPi Model B+ / Pi 2 [ada-1985]
Raspberry Pi Model B+ / Pi 2 호환 케이스 / PaintYourDragon / crystal-clear acrylic enclosure / 6 pieces + four screws
판매가격 : 17,160
적립금 :172
상품상태 :신상품
제품코드 :1247916
제조사 :adafruit
브랜드 :아다프루트 [브랜드바로가기]
출시일 :2018-02-07
구매수량 :
총 금액 :
MCU이용 꿀팁

4,400원
9,100원
9,400원
49,500원
15,400원
10,800원
19,800원
8,800원
1,980원
9,400원
상세정보 배송/취소/교환안내 이용후기 상품Q&A




Adafruit Pi Box Plus - Enclosure for RasPi Model B+ / Pi 2 [ada-1985]

Description

PaintYourDragon is back with another gorgeous laser-cut masterpiece. This time he's taken a pass at updating the classic Adafruit Pi Box for the Raspberry Pi Model B+ / Pi 2.

Keep your Raspberry Pi® Model B+ computer safe and sound in this lovely clear acrylic enclosure. We designed this case to be beautiful, easy to assemble and perfect for any use (but especially for those who want to tinker!) This enclosure is not compatible with the Raspberry Pi Model A or B

The case comes as 6 pieces that slide together and secure with four screws. Made of crystal-clear acrylic, this case keeps the Pi secure, has a hinged top for connector access, and even has little feet cut into the sides so that it stands up above your desk. You can use all of the connectors on the edges of the Pi: HDMI, Audio/Video, microSD slot, micro USB power, Ethernet and the 4 USB ports. There's also a cut out to allow a 40-pin IDC cable to the GPIO breakout pins on the Pi and pass it though the case. For more advanced hacking, the enclosure is designed so that you can lift or remove the top piece and plug any sort of cables you wish into the breakouts in the middle. The case is airy enough that no additional vents or cooling is required - we tested the enclosed Pi over a 24 hour period at full load with no significant increase in temperature.

Be sure to check out more of our awesome Raspberry Pi accessories including:

  • Bare 4 GB SD card - you'll need this to load the Debian image and is not included in a Pi computer purchase. Tested and works perfectly! We also have a wide range of pre-burned SD cars
  • 5V @ 1 Amp USB power supply - you'll need this to power the Pi using a Micro USB cable. Tested and works perfectly!
  • Micro USB cable - required to power the Pi and is not included in a Pi computer purchase
  • HDMI cable - required to connect a Pi to a monitor and is not included in a Pi computer purchase
  • Ethernet cable - required if you want to connect your Pi to the Internet via a router
  • Keyboards and Mice - We have a range of wired and wireless options
  • A wide range of accessories and essentials
  • Various small displays as well as nice Pi-compatible HDMI monitors in a range of sizes, from 2.5" to 10"

This product comes with the 6 acrylic pieces and assembly hardware. Raspberry Pi computer is not included. No other cables or connectors or accessories are included.


 

※ 공급 제조사는 재고 사정에 따라 동일 사양의 대체상품으로 공급될 수 있습니다.
※ 상기 제품에 첨부된 데이타시트는 참고사항입니다.데이타시트에 표기된 내용에 대하여 본사는 어떠한 기술적인 문의 및 발생하는 문제에 대한 법적인 책임을 지지는 않습니다. 
※ 사용자께서는 사용 전 반드시 제품에 대한 테스트 및 확인 절차 후 사용하시기 바랍니다

상세정보 배송/취소/교환안내 이용후기 상품Q&A