감추기
MCU상반기결산
홈 > 라즈베리파이 > 확장보드

Adafruit Pi T-Cobbler Plus Kit - Breakout for Pi A+/B+/Pi 2 [ada-1989]
Raspberry Pi A+/B+/Pi 2 호환됩니다. / 조립(납땜)이 필요한 반제품(키트구성)입니다.
판매가격 : 10,030
적립금 :100
상품상태 :신상품
제품코드 :1265505
제조사 :adafruit
브랜드 :아다프루트 [브랜드바로가기]
출시일 :2018-02-07
주의사항 :해외상품 - 상품 준비기간 약 일주일 소요됩니다.
구매수량 :
총 금액 :
MCU이용 꿀팁

7,150원
9,020원
16,500원
46,200원
61,500원
33,000원
10,030원
8,910원
9,020원
7,900원
상세정보 배송/취소/교환안내 이용후기 상품Q&A





Adafruit Pi T-Cobbler Plus Kit - Breakout for Pi A+/B+/Pi 2 [ada-1989]

Description

  • This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model A+/B+/Pi 2!

    The Raspberry Pi B+ and Pi 2 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize using all of the Model B+'s and Pi 2's 40 pins.

    That's why we now carry the Assembled Adafruit Pi T-Cobbler Plus - Breakout + Cable for Raspberry Pi B+/Pi 2. This Cobbler is in a fancy T-shape, which is not as compact, but is a little easier to read the labels. We also have the more compact original Cobbler Plus.

    The T-Cobbler Plus is an add on prototyping board from Adafruit specifically designed for the B+ and Pi 2 that can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set will make "cobbling together" prototypes with the Pi super easy.

    Each order comes with a 40 pin ribbon cable and assembled T-Cobbler Plus. You can plug the 40-pin GPIO cable between the Pi computer and the T-Cobbler breakout. The T-Cobbler can plug into any solderless breadboard (or even a prototyping board like the PermaProto). The T-Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it.

    Designed for use with Raspberry Pi Model A+/B+/Pi 2 only.  No soldering required!

    The Raspberry Pi B+ / Pi 2, solderless breadboard, breadboarding wires, cables, components, power supply, etc are not included! We do stock many of those items in the shop, so check those out as well!

    Click here if you're looking for the Assembled Pi T-Cobbler that works with the Raspberry Pi Model B!

    Note: The Raspberry Pi Model A+ and Model Pi 2 is also compatible with this product!







Dimensions

  • 73mm x 20mm x 11mm / 2.9" x 0.8" x 0.4"
  • Height with pins: 19mm / 0.8"
  • Width at top of T: 58mm / 2.3"
  • Weight: 14g

 

 

 

※ 공급 제조사는 재고 사정에 따라 동일 사양의 대체상품으로 공급될 수 있습니다.
※ 상기 제품에 첨부된 데이타시트는 참고사항입니다.데이타시트에 표기된 내용에 대하여 본사는 어떠한 기술적인 문의 및 발생하는 문제에 대한 법적인 책임을 지지는 않습니다. 
※ 사용자께서는 사용 전 반드시 제품에 대한 테스트 및 확인 절차 후 사용하시기 바랍니다

상세정보 배송/취소/교환안내 이용후기 상품Q&A