감추기
크리스마스MCU
홈 > 라즈베리파이 > 디스플레이

Adafruit PiTFT 2.2' HAT Mini Kit - 320x240 2.2' TFT - No Touch [ada-2315]
라즈베리파이 호환 / 2.2인치 / 320x240, 16-bit color pixels / 보드 : 65mm x 57mm x 6mm / 화면 : 55mm x 40mm
판매가격 : 33,000
적립금 :330
상품상태 :신상품
제품코드 :1170709
제조사 :adafruit
브랜드 :아다프루트 [브랜드바로가기]
출시일 :2018-02-07
구매수량 :
총 금액 :
MCU이용 꿀팁

99,000원
33,000원
100,320원
33,900원
59,400원
211,200원
42,900원
244,090원
35,200원
60,720원
상세정보 배송/취소/교환안내 이용후기 상품Q&A

Adafruit PiTFT 2.2" HAT Mini Kit - 320x240 2.2" TFT - No Touch [ada-2315]

Description

The cute PiTFT got even more adorable with this little primary display for Raspberry Pi in HAT form! It features a 2.2" display with 320x240 16-bit color pixels. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top of your Model A+ or B+ and fits into our case quite nicely.

It's designed to plug directly onto the Pi Model A+ or B+. While not specifically designed for Pi Model A or B, you can use it with A/B if you solder in an extra-tall 2x13 header (not included) instead of the included 2x20 header Please note, we are still working on Pi 2 support for this screen!

This design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25. All other GPIO are unused and are available on a 25-pin long breakout line. Since we had a tiny bit of space, there's 4 flat tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.

Comes as a fully assembled display PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top or a slim ultra-low-profile header.

To make it super easy for use: we've created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Our tutorial series shows you how to install the software, play small videos, or display images such as from your PiCam and more!

 

Details

  • Board Dimensions: 65mm x 57mm x 6mm / 2.6" x 2.2" x 0.2"
  • Screen Dimensions: 55mm x 40mm / 2.2" x 1.6"
 





※ 공급 제조사는 재고 사정에 따라 동일 사양의 대체상품으로 공급될 수 있습니다.
※ 상기 제품에 첨부된 데이타시트는 참고사항입니다.데이타시트에 표기된 내용에 대하여 본사는 어떠한 기술적인 문의 및 발생하는 문제에 대한 법적인 책임을 지지는 않습니다. 
※ 사용자께서는 사용 전 반드시 제품에 대한 테스트 및 확인 절차 후 사용하시기 바랍니다

상세정보 배송/취소/교환안내 이용후기 상품Q&A