감추기
MCU상반기결산
홈 > 라즈베리파이 > 확장보드

Assembled Pi T-Cobbler Plus - GPIO Breakout for RasPi A+/B+/Pi 2 [ada-2028]
Raspberry Pi Model A+/B+/Pi 2 호환 / No soldering required! / 40핀 케이블 포함 / 라즈베리파이 및 브레드보드, 와이어, 아답터, 기타 케이블 미포함
판매가격 : 10,560
적립금 :106
상품상태 :신상품
제품코드 :1245665
제조사 :adafruit
브랜드 :아다프루트 [브랜드바로가기]
출시일 :2018-02-07
주의사항 :해외상품 - 상품 준비기간 4-6일 소요됩니다.
구매수량 :
총 금액 :
MCU이용 꿀팁

46,200원
40,000원
9,240원
13,200원
43,200원
10,030원
85,500원
7,920원
48,290원
8,470원
상세정보 배송/취소/교환안내 이용후기 상품Q&A




Assembled Pi T-Cobbler Plus - GPIO Breakout for RasPi A+/B+/Pi 2 [ada-2028]

DESCRIPTION

This is the assembled version of the Pi T-Cobbler Plus. It only works with the Raspberry Pi Model A+/B+/Pi 2!

The Raspberry Pi B+ and Pi 2 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize using all of the Model B+'s and Pi 2's 40 pins.

That's why we now carry the Assembled Adafruit Pi T-Cobbler Plus - Breakout + Cable for Raspberry Pi B+/Pi 2. This Cobbler is in a fancy T-shape, which is not as compact, but is a little easier to read the labels. We also have the more compact original Cobbler Plus.

The T-Cobbler Plus is an add on prototyping board from Adafruit specifically designed for the B+ and Pi 2 that can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set will make "cobbling together" prototypes with the Pi super easy.

Each order comes with a 40 pin ribbon cable and assembled T-Cobbler Plus. You can plug the 40-pin GPIO cable between the Pi computer and the T-Cobbler breakout. The T-Cobbler can plug into any solderless breadboard (or even a prototyping board like the PermaProto). The T-Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it.

Designed for use with Raspberry Pi Model A+/B+/Pi 2 only. No soldering required!

The Raspberry Pi B+ / Pi 2, solderless breadboard, breadboarding wires, cables, components, power supply, etc are not included! We do stock many of those items in the shop, so check those out as well!

Click here if you're looking for the Assembled Pi T-Cobbler that works with the Raspberry Pi Model B!

Note: The Raspberry Pi Model A+ and Model Pi 2 is also compatible with this product!


 

TECHNICAL DETAILS

Dimensions:

  • 73mm x 20mm x 11mm / 2.9" x 0.8" x 0.4"
  • Height with pins: 19mm / 0.8"
  • Width at top of T: 58mm / 2.3"
  • Weight: 14g

 

※ 공급 제조사는 재고 사정에 따라 동일 사양의 대체상품으로 공급될 수 있습니다.
※ 상기 제품에 첨부된 데이타시트는 참고사항입니다.데이타시트에 표기된 내용에 대하여 본사는 어떠한 기술적인 문의 및 발생하는 문제에 대한 법적인 책임을 지지는 않습니다. 
※ 사용자께서는 사용 전 반드시 제품에 대한 테스트 및 확인 절차 후 사용하시기 바랍니다

상세정보 배송/취소/교환안내 이용후기 상품Q&A