감추기
크리스마스MCU
홈 > 라즈베리파이 > 디스플레이

HDMI 4 Pi - 10.1' Display 1280x800 IPS - HDMI/VGA/NTSC/PAL [ada-1287]
고해상도, 광시야각 10.1인치 TFT 디스플레이 / 임베디드 컴퓨팅(라즈베리파이 등)을 위한 최적의 선택! / 9-12VDC (아답터 미포함) / HDMI, VGA or NTSC/PAL 입력 / 16:10 / 1200 x 800 / 350cd / 800:1
판매가격 : 191,400
적립금 :1,914
상품상태 :신상품
제품코드 :1171207
제조사 :adafruit
브랜드 :아다프루트 [브랜드바로가기]
출시일 :2018-02-07
구매수량 :
총 금액 :
MCU이용 꿀팁

59,400원
199,400원
68,000원
59,400원
59,400원
35,200원
33,000원
174,000원
20,900원
163,680원
상세정보 배송/취소/교환안내 이용후기 상품Q&A

    HDMI 4 Pi - 10.1" Display 1280x800 IPS - HDMI/VGA/NTSC/PAL [ada-1287]






Description

Yes, this is a beautiful bright 10.1" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 10" diagonal and is a 'raw' display as is used in a tablet, ultra thin with some mounting tabs around the edge. We include a driver board with HDMI, VGA and Composite inputs. The display is very easy to use - simply connect a 9-12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports. Voila, a display!

There's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tried to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.

For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to 1280x800 in case it doesn't detect the resolution properly. You can see our suggested config.txt in the Technical details tab. The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save.

For use with a BeagleBone black, we found it works when plugged in, no configuration required.

A power adapter is NO LONGER included. You will need to either purchase a 9-12VDC adapter or you can use one you've already got around the house.





HDMI/VGA/NTSC/PAL Display - 10.1" Diagonal - 1280x800 IPS (1:12)




TECHNICAL DETAILS

  • Driver Datasheet
  • Keyboard Datasheet
  • Power with 9-12VDC (recommended)
  • 16:10 display ratio
  • Resolution: 1200 x 800
  • Visible area: 217mm x 135mm 16:10
  • Brightness: 350cd/m2
  • Contrast: 800:1
  • We ship with a an HSD101PWW1 display, or equivalent
  • Not HDCP compatible - it cannot be used with 'secured' HDMI sources
  • Display dimensions: 220mm x 139mm / 8.7" x 5.5"
  • Thickness: 5mm / 0.2"
  • Mounting Tab Hole Diameter: range between 2.1mm - 2.9mm / 0.08" - 0.11"
  • Bottom Mounting Hole Distance: 62mm / 2.4"
  • Top Mounting Hole Distance: 87mm / 3.4"
  • Right Side Mounting Hole Distance (closer hole): 125mm / 4.9"
  • Right Side Mounting Hole Distance (further hole): 130mm / 5.1"
  • Left Side Mounting Hole Distance (closer hole): 118mm / 4.6"
  • Left Side Mounting Hole Distance (further hole): 124mm / 4.9"

Power draw from combined display+HDMI driver when backlight is on

  • 5V: 980mA (not recommended, sometimes doesn't work @ 5V)
  • 6V: 780mA
  • 7V: 660mA
  • 8V: 575mA
  • 9V: 515mA
  • 10V: 450mA
  • 11V: 415mA
  • 12V: 380mA

For more information on this HDMI display, including a suggested config.txt, check out our HDMI Display UBERGUIDE!






※ 공급 제조사는 재고 사정에 따라 동일 사양의 대체상품으로 공급될 수 있습니다.
※ 상기 제품에 첨부된 데이타시트는 참고사항입니다.데이타시트에 표기된 내용에 대하여 본사는 어떠한 기술적인 문의 및 발생하는 문제에 대한 법적인 책임을 지지는 않습니다. 
※ 사용자께서는 사용 전 반드시 제품에 대한 테스트 및 확인 절차 후 사용하시기 바랍니다

상세정보 배송/취소/교환안내 이용후기 상품Q&A