감추기
MCU상반기결산
홈 > 라즈베리파이 > 디스플레이

HDMI 4 Pi: 7' Display 1280x800 IPS - HDMI/VGA/NTSC/PAL [ada-1931]
7인치 IPS screen, 1280x800 / 고휘도 고해상도 광시야각 / 16:10 display ratio / 400cd/m2 / 800:1 / HDMI, VGA 및 컴포지트 입력포트 기반 드라이버 보드 포함 / 5 - 9VDC (2.1mm 잭) / 오디오 출력, 아답터 미포함(별매)
판매가격 : 151,800
적립금 :1,518
상품상태 :신상품
제품코드 :1171803
제조사 :adafruit
브랜드 :아다프루트 [브랜드바로가기]
출시일 :2018-02-07
구매수량 :
총 금액 :
MCU이용 꿀팁

34,100원
244,090원
16,000원
152,700원
35,700원
211,200원
100,320원
46,200원
35,200원
62,700원
상세정보 배송/취소/교환안내 이용후기 상품Q&A




 HDMI 4 Pi: 7' Display 1280x800 IPS - HDMI/VGA/NTSC/PAL [ada-1931]

DESCRIPTION

Make a lovely video setup with a 7" IPS screen at 1280x800. Here we have a beautiful bright 7" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 7" diagonal and is a 'raw LVDS' display as is used in a tablet which makes it ultra thin and very bright. We include a driver board with HDMI, VGA and Composite inputs. The setup is very easy to use - simply connect a 5 to 9VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports . Voila, a display!

This version does not come with audio output Click here if you're looking for a display with audio and speaker drivers

There's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tries to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.

For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to native 1280x800 in case it doesn't detect the resolution properly. You can see our suggested config.txt in the Technical details tab. The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save.

For use with a BeagleBone Black running Ubuntu/Debian, we found it works when plugged in, no configuration required.

A power adapter is NOT included. You will need to either purchase a 5-9VDC adapter or you can use one you've already got around the house. We show the display on a bent wire stand which is not included, but you can pick one up here.

 

SPECIFICATIONS

  • Driver Datasheet
  • Keyboard Datasheet
  • Dimensions of Screen: 105mm x 160mm x 3mm / 4.1" x 6.3" x 0.1"
  • Weight of Screen: 91g
  • Power with 5 to 9 VDC
  • ~500mA power draw at 9V
  • 16:10 display ratio
  • Resolution: 1200 x 800
  • Visible area: 150mm x 95mm 16:10
  • Display dimensions: 162mm x 104mm x 4mm (6.4" x 4.1" x 0.2")
  • Brightness: 400cd/m2
  • Contrast: 800:1
  • Uses an HSD070PWW1 display
  • Weight (excluding power cable): 290g/10.2oz
  • Not HDCP compatible - it cannot be used with 'secured' HDMI sources

Power draw from combined display+HDMI driver when backlight is on

  • 5V: 980mA
  • 6V: 780mA
  • 7V: 660mA
  • 8V: 575mA
  • 9V: 515mA

※ 공급 제조사는 재고 사정에 따라 동일 사양의 대체상품으로 공급될 수 있습니다.
※ 상기 제품에 첨부된 데이타시트는 참고사항입니다.데이타시트에 표기된 내용에 대하여 본사는 어떠한 기술적인 문의 및 발생하는 문제에 대한 법적인 책임을 지지는 않습니다. 
※ 사용자께서는 사용 전 반드시 제품에 대한 테스트 및 확인 절차 후 사용하시기 바랍니다

상세정보 배송/취소/교환안내 이용후기 상품Q&A